Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Thumbs Up Oλα τα δορυφορικά αρχαία όπως και νέα....

    Ας ανεβάζουμε εδώ όλα τα δορυφορικά συστήματα που είχαμε στο παρελθόν όπως και νέα...



    Last edited by kreta111; 21-12-2011 at 10:07 AM.

  2. The Following 8 Users Say Thank You to kreta111 For This Useful Post:

    Admin (21-12-2011), Andreas (22-12-2011), andros82 (22-12-2011), andy37 (04-06-2013), georgesfind (11-06-2013), nickman9271 (21-12-2011), sotirisvvv (21-12-2011), telisgr (21-12-2011)

  3. #2
    Webmaster-Site founder Admin's Avatar
    Join Date
    Apr 2011
    Planet Earth !!!
    Blog Entries
    Thanked 1,316 Times in 500 Posts

    Thumbs Up Απο

    Vintage satellite. Including receivers with knobs on!

    Very few museums deal with satellite products but since we have had a satellite business since 1989
    this was easy for us. At the time we were able to find receivers from the mid 1980s.
    The earliest receivers had knobs on and either had no wireless remote control or bulky simple handsets.
    Other early, interesting, landmark satellite products are also included below. Dates are included.

    Some of the "Knobs-on" collection.

    When we started in the satellite industry in 1989, receivers did not have knobs on. They were, even
    then, remote control, but when customers were upgrading at the end of the 80s and beginning of the 90s,
    they were upgrading from receivers with knobs on and so we took the opportunity of keeping some
    of them. (Otherwise they would have been thrown away).
    Domestic satellite receivers with knobs on would originate from the mid 1980s.
    Pictured above, bottom to top, Drake ESR3240 receiver with Drake APS3240E 36 volt positioer to the right of it.
    Silver Drake 320E (earlier model than the 3240), Rockdale TR12E, Rockdale AP100 36 volt positioner,
    Satcom 7700, Echostar SR-50, Rainbow 12 volt receiver. This last one was bought new at the time as
    I found it very interesting and could not resist it, even though I had no plans to use it!


    May 1985. DX Antenna DSB-700 satellite
    receiver with DSB-400 36V dish positioner.

    The Date on the DBS-700 manual is May 1985. It is likely that this represents the date that
    manufacturing of this receiver began.
    The manufacturing date on the receiver's serial plate is Oct. 1985.
    A deposit for the full system was paid in Dec. 1985 and the final invoice is dated 6th Jan. 1986
    The customer was from Westcliff-On-Sea, Essex, England and the manuals and the receipt are
    shown above. It is unusual to find that all of the paper work is with the receiver.
    The purchase price of the DBS-700 was £437.50 It was supplied with a 1.5m motorised
    dish (at extra cost.) The DSB-400 36V positioner was £350.00
    The papers include an advert which details a DSB-600 satellite receiver which was a lower cost model.
    The manufacturer was called DX Communications, Inc. from NEW York, USA and was
    a subsidiary of C Itoh & Co. (America) Inc.
    It is unusual to find a "knobs on" domestic satellite receiver and positioner kit from
    an early date of May 1985 to also include wireless remote control capabilty.

    1985. The Connexions CX2450 & CX2460.

    Connexions became a very well known make in the late 1980s and early 1990s.
    They often had full page adverts in the satellite magazines and they produced a very good range of
    quality satellite receivers including motorised receivers. We are very please to have both models of connexions
    receivers from 1985 - the CX2450 and the CX2460. The CX2460 was a little more up-market and expensive
    as it included a remote control and a channel number display. A magazine "Radio & Electronics World" from
    Feb. 1986 details a news article about both models and a Connexions advert. 1985 was really the start of
    direct to home broadcasts. These receivers must be considered as the first of several
    satellite receivers ever to be sold specifically for domestic use.

    Receiver memory lane ...

    These early receivers were common when I started in the satellite industry and they bring back memories .....

    1985 Echostar SR-4500

    The 1st ever integrated motorised receiver.

    The 4500 in the museum was manufactured in 1987. This model was first introduced in 1985 and
    was made until the SR - 5500 replaced it. The 5500 was introduced 1988/89.
    The museum unit is in very good condition and comes complete with handset, manual and leads.
    In the original collection going back many years we did have a 4500 handset, so we
    now have two handsets. We also have an Echostar SR - 3500 handset.
    The SR - 3500 was 1984/85 approx. but was not motorised.

    2007 Update

    Even back in 1989 / 90 there were only old SR4500s to be seen. Incredibly in Dec. 2007 the museum
    acquired a brand new and boxed 4500 complete with handset and manufacturers packaging.
    This was an unbelievable find and is a valued addition to the vintage satellite collection.
    It is especially important as this receiver was a first achievement and that
    is what this museum is mainly about.

    1985. Wilson YM 450 satellite receiver.

    This is another very early satellite receiver. The adverts below are from Sept 1985 and
    so this receiver must have been available from the spring or summer of 1985. This is a US
    product. There is no evidence it was ever marketed in Europe. The advert is interesting as
    it shows a feedhorn, mechanical polariser, a prime focus dish and a patio mount. The
    theme of the advert is of an "easy, do it yourself installation". As with many companies
    from that era, there is no evidence either that this company still exists.

    "1985". Uniden UST-1000.

    From the current Uniden website at it is clear that Uniden
    started making satellite receivers in 1984. The Uniden UST-7007 (below) is from 1987. That would help date
    the UST-1000 as between 1984 and 1986. Probably 1985.
    Echostar SR-1000.


    Early Drake satellite receivers.

    1987. The Drake 320E satellite receiver

    In the UK, Drake was distributed by Alston-Barry International (originally Alston-Barry Satellite Services)
    from the Mid 1980s to 2000 approx. See a Drake advert below from 1987 for the ESR320E receiver.

    The Drake ESR3240 satellite receiver with
    Drake APS3240E 36-volt positioner.

    The Drake ESR 240 satellite receiver

    The ESR 240 is another great receiver with knobs on AND large meters.
    Clearly from the early to mid 1980s. In it's day this would have been a top of the range satellite receiver.
    This unit was added to our collection in April 2007.
    It is arguably the best looking "knobs on" receiver we have.
    Below we can see the Drake ESR320E in an advert from "Satellite TV Europe" dated August 1987.

    From the company history page on the Drake web site at,
    "Drake expanded their product line with marine radios and other reception hardware. In 1981, Drake investigated the then
    semi-hobbyist field of home satellite reception equipment. Drake engineers, under the leadership of founder's son
    Peter Drake, completed a prototype satellite receiver in just four months."
    Drake was founded in 1943. From 1957 they built shortwave radios for the radio ham enthusiasts.
    Drake is one of the very few founder satellite companies that still exists today.

    1987. The Rockdale TR12E & SLC-7

    The Rockdale TR12E receiver with AP100 36V positioner (on top of it)
    and (below) the Rockdale SLC-7 satellite receiver.

    The Rockdale TR12E was the none remote control version of the CR-1100 receiver shown in the advert below.
    This advert is from Satellite TV Europe and also features the Rockdale AP100 matching 36 volt positioner.
    The SLC-7 satellite receiver also had remote control capabilty and could be used with the AP100 positioner.

    1987. The Uniden UST-7007 receiver
    with UST-771 positioner.

    Motorised receiver kit. 36 volt positioning.

    This was a popular motorised receiver kit in the mid 1980s.

    This kit is complete with 7007 manual and both handsets and is in excellent condition.
    As stated elsewhere on this page, I started in the satellite industry in 1989 and so these
    units were a little "before my time". They were not being sold new at that time but they were
    reasonably popular in peoples homes. Putting that last statement into context, popular with
    the people who had motorised systems which even today is a minority situation.
    These Uniden units were classed as good quality units from a manufacturer known for
    quality products. Maybe not top of the range flagship units but certainly mid priced
    good quality units. Indeed, the 36 volt positioner unit is as good, if not better, than
    any available today and probably better built than any of them. The receiver
    (indeed, all early receivers) became out of date within a few years as it only
    had a 1750MHz tuner. (Modern LNBs need a 2GHz tuner). Many people, however,
    continued using the 771 positioner with more modern receivers. It was really
    only when the Echostar 5500 came out in 1989 (approx.) that this unit started
    to look dated and when the Chaparral Monterey came out the same year
    (1989) - everything took second place to a Monterey.

    Coming soon - a very early Uniden satellite receiver with knobs on and a VU meter.

    1987. Discus Elipse motorised receiver

    This was an inexpensive motorised satellite receiver.
    An integrated receiver positioner - 36 volt positioning.

    The manual says - "Design and production by The Communications Factory Dundee, Scotland." "Discus Satellites Ltd."
    And on the receiver - "Made in Scotland."

    At the time I new about this Scottish receiver and it was very cheap for all the features it had,
    However, it was a receiver that I made a conscious effort to avoid and the reason was that it
    was complicated to set up and complicated to use. Other receivers on the market may have been
    more expensive but they avoided all the problems of customers "tearing their hair out" and complaining!
    It does, however deserve it's place in the history of this type of receiver. These days there are
    countless products that do a similar job, but in those days there was just a handful.

    Moderm motorised digital receivers with blind search can easily exceed 8000 channels after a full scan.
    Here is a quote from the Discus Elipse "Install and Use" manual,
    "Thank you for selecting the Elispse Satellite Receiver. You now own a window to the world with
    access to 184 channels of satellite television viewing - present and future."

    1987. Skyscan Systems K1A receiver.

    A motorised satellite receiver from 1987.
    One of the first domestic integrated motorised positioner
    satellite receivers - 36 volt positioning.

    Details on the back of the receiver say "Made in Canada"
    When you check out the US patent on this receiver it refers to "AED Satellite Systems, Ltd"
    in Montreal Canada. That all seems to check out and agree with the description of this
    product. If so, the US patent was filed in 1984 and issued in 1985. That being the case, a
    manufacturing estimated date on 1987 would not be unreasonable and would tie in with
    other similar products and dates above. Also the advert below now confirms 1987.
    In addition, from online patents research, the inventors in Montreal Canada hold several
    patents from 1975 to 1980 and the Assignee was AED Satellite Systems, Ltd in Montreal Canada.

    This is another receiver that had a good following at the time. Again just a couple of years
    before I started but they were in peoples homes when repairs or upgrades were being dealt with.

    We also have a "Skyscan" advert from 1982 from the spring issue of "Satellite TV News" but it
    is not clear whether this is the same company. It should be noted that in 1982 there were a few
    satellites above the USA transmitting TV programs that could be received on 3m (10') dishes.
    Skyscan Satellite Systems and Skyscan Corporation may or may not have been the same company.

    The Satcom 7700 satellite receiver

    This receiver has been in the collection for very many years and yet we have no information about this item.
    It would have dated from around 1985 to 1987.


    1989. The Bennetts 2026L
    satellite receiver mystery

    Bennetts was a large department store on Shields Road, Newcastle (with a head office on Kings Street, Norwich. UK)
    Clearly this receiver must have been sourced and badged. That is quite a common practice these days by large
    satellite distribution companies but for a general retailer store to do that in 1989 is interesting.
    The receiver has some original warning stickers underneath that are in French and these
    would indicate that was the country of origin. It was purchased in 1989 with a 90cm fixed dish
    for £299.99 - this was expensive in those days. It was used on the Astra satellite at 19E.
    In 1989 this satellite required a 90cm dish as it was not as powerful as it is now.
    The controls are interesting. Signal strength meters were quite common.
    A manual polarity switch! and variable skew using a knob on the front.
    If anyone knows any more about a receiver with model number 2026L and probably
    manufactured in France please let us know. The Receipt is dated the 3rd March 1989.
    Sold at the beginning of March 89, this model may have been available from 1988

    The Zeta-1000L satellite receiver.

    A little more light now shines on the Bennett 2026L receiver above. This Zeta-1000L receiver is
    exactly the same. It would appear that the Bennetts receiver is a clone of the Zeta receiver.
    It is also possible that they are both clones but the Zeta receiver also came from a local supplier
    in North East England. It originated from a well known distributor called Network Communications
    from Hartlepool. This satellite distributor disappeared in the mid 1990s but a local installer
    purchased it and eventually donated it to the museum. It was purchased in the late 1980s and for
    many years was used in a local pub. The installer supplied it to the pub and many years later
    when the pub upgraded he took it home. This additional information is useful but we would still
    like to know more about the origins of this unit. From the serial number - 002250 if may have been
    earlier than the Bennetts receiver with a serial number of 007981. There is also a small difference
    in the connections on the back with additional sockets on the Zeta-1000L
    Network communications also produced their own range of prime focus dishes.

    Update Feb 2011
    It seems there was a matching dish positioner for the Zeta-1000L. It was called a Zeta-7000 positioner.
    Also from an email we recently received -
    "My observations about the production and serial numbers are as follows..
    The first batch of Zeta's were model 1000 and had serial numbers less than 1000
    The second batch were Zeta model 1000L and had serial numbers in the 2000's
    The third batch were also 1000L's but serial numbers jumped up to above 5000
    The five I have right now are numbers 2258, 2480, 5405, 5466 and 5751 The three different productions
    can be internally identified by three different main printed circuit boards. The first PCB had only two
    voltage regulators on the PCB and the later second and third had four, but their are more subtle
    differences on the PCB layout between the 2nd and 3rd productions.
    All units I saw with 2000 serial numbers had black meters and all 5000 serial numbers had yellow meters.
    The lids on the 5000's had extra holes in the top and sides to aid cooling these were round holes
    instead of the earlier slotted holes in the top only on models with 2000 serial numbers.
    I have seen several Bennett branded units but none are in my possession right now. I remember
    them as having PCB's like the Zeta second and third production models. A friend has a Zeta 1000
    out of the first production unit serial 000070 he also has Galaxy 2022L s/n 9466 and
    Susumu 2026L s/n 4324 both have "Zeta" PCB's inside."

    Note the serial number of the Zeta 1000L in the museum is 2050

    Feb. 1989 Triax Triasat 2000S
    with positioner.

    Motorised receiver kit. 36 volt positioning.

    This kit is complete with positioner, manual, handset and original boxes and is in excellent condition.
    This is not a unit that I have ever seen before but it is clearly dated in the manual at Feb. 1989.
    It has some interesting features. The unit looks very modern and has concealed controls under a
    unique hinged up lid. The positioner module looks like the types of units used in the very early 1980s
    and resembles a power supply rather than a piece of domestic AV equipment. The positioner is connected
    to the receiver by a control cable and so everything is electronically integrated and controlled by
    one handset. The handset is large, as most were at the time. The manual shows that the receiver was part
    of a complete satellite system including a Triax prime focus dish and using a mechanical polariser.
    Prime focus dishes were the norm until the mid. 1990s.

    Once again is very pleasing to have a complete boxed kit. Triax is a company that manufactures a very
    wide range of products today. Whilst most manufacturers of historic products on this page have long
    since disappeared, it is good to include an old receiver from a manufacturer that
    is still a market leader today.

    1989 Bang & Olufson Beosatrx
    receiver with 36v positioner.

    There have always been attempts to produce satellite receivers that are stylish to look at. A very interesting and
    notable attempt was made by Bang and Olufsen in 1989 : the Beosat receiver. Many will remember the way B & O
    produced very slim stylish CRT televisions but on closer inspection of the rear of the set, it was an optical
    illusion. The tube still stuck out of the back just as far, it was simply the sides that were thin.
    The 1989 Beosat used the same visual trickery. It looked like a very slim unit but on closer inspection the case
    is actually much bigger. The base and feet hide the depth and the width and depth make it quite large.
    This receiver also had an option of motor control and could be a full motorised receiver. This involved a
    connection lead to a separate box. From the picture of this add-on box it is clear it needed to be hidden
    away out of sight. We are pleased to have a complete kit in the manufactuers packaging.

    1989/90. The PDS Ltd. Rainbow
    12 volt receiver. 1989/90 approx.

    Possibly the first ever 12-volt receiver aimed at the caravan / leasure market.

    This unit was available new when I started in the satellite industry and therefore can be dated
    around 1989 - 1991 approx. Research tells us that the PDS Electronics Ltd. company was
    dissolved in 1995 and I don't remember any other product that they made although there
    could have been. This analogue receiver is very light weight and has knobs on. Even in
    1990 knobs were a little unusual and were a throw back to the early 1980s but being a
    simple to use unit for the mobile leasure market, it was meant to be no frills and simple
    to use. This unit in the museum was owned by me from new although it was bought in as a
    sample and like many things over the years was stored as a possible future museum item.
    In those days on-line museums were not even dreamt of but I always felt somehow when
    I saved something and put it away, perfect in it's original packaging, that it would be an
    consumer electronics antique in the future.
    If anyone has any more information on this product, please let us know.

    Update Feb. 2011 - email - Some information on "PDS" -
    "PDS were a prolific manufacturer of "pirate" decoders for the Dutch film channels 'Filmnet' and 'RTL'
    in the 1980s and early 1990s from Astra 1 at 19 east. They made a decoder called a "Combi-99".
    The decoders were available fairly cheaply at about £40.00 with scart in and out and a
    row of dip switches to set baseband, video, etc. When Filmnet was encryption (LEDs lit up!)
    the "Combi-99" would unscramble the film into reasonable quality pictures. Filmnet, however, were
    not too happy about the availability of cheap decoders and every 2 weeks or so would change the
    encryption routine - PDS customers would then have to send the decoder back to PDS for
    adjustment and return, then lose pictures again only a few weeks later."

    "PDS also made an unusual item called a 'sync inserter'. This was of interest to Sat-zappers as
    the news feeds over the EBU circuits on 7 east used sound in syncs [SIS], a form of early digital
    transmission when the audio was digitised and inserted with portions of the picture syncs thus saving
    the cost of leasing both video and audio circuits. This was first used by the BBC for terrestrial network
    links across the UK. The problem was that any audio modulation resulted in the pictures shaking.
    The sync inserter provided the enthusiast the means of inserting his own locally generated syncs
    and removing the picture shake. So you enjoyed stable pictures but with no sound. These things
    were critical to set, mine was returned for repair and PDS went bust whilst the sync
    inserter was with them and it was never seen again."

    This page will soon also contain -

    Pace BSB receiver in original packaging. (In storage - will be added to the site later)
    Toshiba BSB receiver in original packaging. (In storage - will be added to the site later)
    Early LNB and polarisers. (In storage - will be added to the site later)
    RSD 300 satellite receiver (see blind search notes below)

    The Echostar SR-50 1992

    A very early analogue satellite receiver with knobs on.

    When I started in the Satellite Industry back in 1989, the experts in the industry at the time
    proclaimed the Echostar 5500 (which was available new in the shops in those days) as the best
    motorised satellite receiver in the world. It was fairly short lived as at about that time the
    Chaparral Monterey (see below) came out and then (in my opinion and many others) took the top
    spot for the next 10 years as it was continuously developed and improved by SCT. However,
    during that time Echostar introduced the 6500, the 7700, and then the 8700 analogue receivers.
    After that came the 3000 analogue and digital receiver, the 3600 analogue and digital receiver,
    and the 7000PVR. (Basically a 3600 with a hard drive.) By the time the 3000 came out the Monterey
    had finished it's run at the top and the last three analogue and digital Echostar receiver
    mentioned were then each proclaimed as being the best motorised receiver available at the time.
    Not that the earlier analogue receivers were not good. They were excellent but they were also
    much cheaper than the Monterey. A typical price being under £500 (e.g. the 8700) whereas
    top-of-the-range late Monterey was as much as £2500 just the receiver! We are, however, getting
    a little ahead of ourselves (literally) as we need to go backwards in time not forwards. Before
    the 5500 back in 1989 was the Echostar 4500 and before that the 3500. In those days, I saw these
    two in peoples homes when they were upgraded to an Echostar 5500 or Monterey and so although they
    were "before my time in satellite", I did see them in the second hand area. The 5500 was a very
    good receiver but I was not at all impressed with the earlier 4500 or 3500 as they had complicated
    menus and were difficult to use and set up. Everything mentioned so far was controlled by a
    handset remote control and my guess is that the Echostar 3500 could have been 5 years earlier
    the 5500 of 1989. (i.e. early to mid 80s) So what about the SR-50 with knobs on? Was it earlier
    or could it have been around at the same time as the 3500 to 5500? (I know it was available for
    a number of years). It was not a motorised receiver. It had no internal positioner. It had knobs
    on the front. It was considered to be a good enthusiasts receiver due to it's excellent
    specifications (for the time) and the fact it had very good adjustable controls for the "DXer".
    and feed hunter. I do know some people at the Echostar factory and am at the moment asking for
    the timeline history. I will update the site soon.
    This Echostar SR-50 has been donated to the museum by Roy Carmon a well respected feed hunter
    and writer. On our main Satellite Superstore web site (link below) Roy has kindly provided
    us with useful independent reviews and information for our site.

    Update Feb 2011 -
    The EchoStar SR-50: it was produced in 1992. Not earlier. Its main selling feature was its very
    low threshold -- this is the measure of the ability to pick up weak satellite signals and deliver
    a watchable picture while other receivers just deliver snow on the screen. The SR-50 was much loved
    by DXers in Europe and the UK but in fact the main intended market was Africa and the Mid East where
    people were able to receive unintended sidelobes off Astra 1a.
    For reference, while in the UK and Europe the SR-4500 was indeed replaced by the
    SR-5500, 6500, 7700, 8700, etc., the SR-4500 had its greatest success south of the Sahara.
    As noted above the reason was that it had a very low threshold and so it was sensitive enough
    for people as far south as Lagos, Nigeria, Harare in Zimbabwe, and even Jo'burg to be able to
    pick up a few Ku channels off Astra 1a. These sales in Africa were very strong during the early
    1990s and EchoStar introduced the SR-50 to strengthen its hold on those markets.

    Please note that we are looking for an Echostar 3500 for the museum.

    The SCT Monterey.

    The most upgradable and upgraded satellite
    receiver in the world for 10 years.

    For 10 years (1990 to 2000) the Monterey was the best satellite receiver in the world.
    Many more pictures are to follow when the museum's Montereys come out of storage.
    (We have 4 of these units in storage.) Later models were both analogue and digital.
    Our parent company sold the Monterey for all of the 10 years. Our company was an
    authorised Monterey repair and upgrade centre. The Monterey was the most upgraded
    satellite receiver of all time. Over the 10 year period it received countless software
    upgrades. The first software had only 100 channel locations. Later software was 5000+
    On the hardware side it had the following upgrades, Videocrypt decoder,
    D2MAC decoder, Videocrypt and D2MAC decoder and 4 card reader, low threshold board
    and sync inserter for low signals and better sensitivity, 2GHz tuner and tone inserter
    for universal LNBs, integrated digital board with very crude blind search. (Not really
    designed for blind search, more a by products of the chip design which gave it auto
    FEC and symbol rate and some crude blind search qualities.) All this in the late 1990s!
    Another first and even now, never equaled or beaten, the Monterey had the largest
    alpha-numeric display ever fitted to any satellite receiver. Earlier models without
    the display could be upgraded. Even an 8 card reader (two stacked 4 card readers)
    was available and can be seen in the picture above.

    The Monterey was manufactured by Chaparral Industries in California but Steve Chilver
    in the UK was, at the time, a consultant engineer for Chaparral. He then became the
    authorised importer forming his own business SCT Ltd. and he then designed, developed
    and manufactured all of the software and hardware enhancements that made the Monterey
    the worlds best motorised satellite receiver. The SCT Monterey also takes the title
    "the most expensive consumer receiver of all time." Models started at £1000 and went
    up to £2500 depending on how many features and hardware upgrades were added.
    There were plenty of takers even at these high prices which sharply contrasts
    with the situation today where customers think receivers at £300 are expensive.
    We have 4 Monterey’s in the museum. One of them is complete with all
    manufacturers packaging and in perfect condition.

    The "What Satellite Magazine"
    supplement - World Satellite Finder.

    This supplement eventually led to this web site!

    This supplement was published in a What Satellite Magazine in 1989. After reading this
    supplement a Monterey was purchased from a trade outlet called "Micro X" and a motorised
    satellite system was installed. About a year later our satellite business was started and
    the company became an Authorised Chaparral / SCT dealer for the Monterey receiver.
    Our first satellite website started in Feb. 1998 and stated in April 2000
    This eventually led to the museum web site in April 2004 with a vintage
    satellite page. In October 2009 the dedicated web site was introduced.

    The History of Motorized Satellite Receivers.

    1980 to the present.

    Fully integrated receiver (36 volt) positioner motorised receivers.

    The main, most consistant manufacturer over 20+ years was Echostar.
    Echostar motorized analogue receivers - 4500, 5500, 6500, 7700, 8700.
    Echostar motorized analogue and digital receivers - 3000, 3600, 7000 (see the 7000 above).
    (there were also some digital only models that ran alongside the analogue and digital models,
    but the latter were classed as the most up-market.)

    The Echostar SR- 4500 was the first ever analogue receiver with built in 36 volt positioner,
    single input to receive both C & KU band satellite channels in 1985. It was before my time
    (pre-1989) but I did see them in customers houses when they were upgrading. For the
    first time it was possible to move the dish and select channels on the one handset.
    More about the SR-4500 is where it is featured above.
    The Echostar SR-5500 was the main motorized receiver available back in 1989
    and they were sold in large numbers. They were a very good easy to use receiver.
    I attended a motorized training session in 1989 run by Eurosat. The lecture was
    being given by a company called Pro-com who made a very high quality dish (unfortunately
    the company went out of business about 5 years later) but the MD who was giving the lecture
    was using a new Echostar 5500 which he referred to as being the "best receiver in the world."
    At the time I thought that he was a little out of date as the Chaparral Monterey had recently
    been introduced. The future proof, upgradable Monterey ruled the skies for the next
    10 years. That being said the Echostar 5500 was very good in it’s day. The 6500 had
    reliability problems but the Echostar 7700 and 8700 (1994) were both excellent. They
    were a good alternative to the Monterey as they were much cheaper. There were some
    other receivers (not so up-market) that came out during this time scale including a
    very complicated to use Discus Elipse (that most dealer / installers avoided like the
    plague – it had two things going for it. It looked good and it was cheap but it was
    a nightmare to use and set up.) and the excellent Pace 500/508 (1995) (not expensive
    but the channels were not grouped in satellites – just one long list – apart from that,
    very good and very easy to set up.) Another very good motorised receiver was
    the Drake 2000 (and the cheaper Drake 800) which was similar to the Echostar 8700.
    When digital started the Monterey received a free to air digital option (1998/99) which
    was the only Monterey upgrade that was troublesome. This was a first but it was not really
    a fully integrated analogue and digital 36 volt motorised receiver, more of an add on with
    some integration. Really the first ever fully integrated analogue and digital motorised
    receiver the Manhattan 2500 in 1999. The user menus were not ideal and it had bugs in
    the software but it was the best at the time as it was the only one at the time!
    Manhattan then followed it with the 5500 a year later in Dec. 2000 which had all the same
    problems. In January 2001 Strong brought out the 4375 which was an excellent analogue
    and digital motorized receiver with easy to use menus. It was ideal for a couple
    of years but then Strong pulled out of the UK leaving dealers without any back up.
    (When that happens, and a company eventually return to the UK market, as a dealer
    we will not go back to them. Same happened with a company called Metronic.) Following
    the Strong was the Echostar 3000 later in 2001 which was an excellent receiver but had
    some reliability problems, Following the Echostar 3000 was the Echostar 3600 in 2002
    which was even better and totally reliable and then finally in 2004 the Echostar 7000PVR
    which was a Echostar 3600 with a hard drive inside. At the same time as the 3600
    and 7000, Technomate introduced the 5500 DAPCI analogue and digital 36v motorised
    receiver and 5500 CIP digital only 36 volt motorised receiver in 2002 followd by
    the 5500 DAPCI and CIP plus in 2004. By now the balance had shifted and the vast
    number of channels in the sky were digital. The need for an analogue component
    in a satellite receiver had gone. After the Technomate 5500 CIP, Manhattan in
    2005 introduced the Plaza range of receivers with a whole new chassis, great
    menu structure and blind search. Some models had 36 volt positioning.
    They are still current and are excellent and reliable.

    Some library pictures are below of these receivers. Only the Monterey
    and Echostar 7000 are in the museum.

    Top row left - Pace 508. Top row right - SCT Monterey Classic with 8 card reader.
    2nd row left - Manhattan 2500. 2nd row right - Manhattan 5500
    3rd row left - Strong 4375. 3rd right - Echostar 3000.
    4th row left - Technomate 5500 DAPCI. 4th row right - Echostar 3600.

    Receiver positioners. The 2-box approach to motorized systems.

    Good early examples are on this page. Very early examples are the Drake 3240 and Rochdale
    100 (see receivers with knobs on) - both early 1980s. Then in 1987 came the Uniden 7001
    and 771 (see it in this page.) In the early 1990s we had the Pace 800 (and 900) with
    separate positioner. This was probably the most common motorized receiver set up in the
    country until the Pace 508 came out. The 800/900 with positioner was unlike previous motorized
    receivers that used the 2-box approach as the two boxes talked to each other down a scart
    lead and acted like an integrated unit. Before the Pace 800/900 and positioner, motorised
    2-box units had 2 remotes, one to move the dish and the other to select the channel.
    with early units, the two boxes matched each other in appearance when stacked but
    did not talk to each other.

    Of all the units mentioned in this history section, the outstanding ones were the Monterey,
    the Echostar 8700, the Drake 2000, the Echostar 3600 and 7000 and the current
    Manhattan Plaza 36 volt motorised receivers, the 500, 550PVR and 450PVR

    Another popular motorised receiver from the late 1980s was the Skyscan. Made in Canada.
    See the special feature on the Skyscan above.

    BSB, MAC and D2MAC. 1990

    BSB promotional items & programme guides

    BSB launched 5 channels on the 15th April 1990. The original launch date was the 30th Sept 1989
    but due to a problem with the supply of chips for the more advanced MAC decoders, this date was
    postponed. The 15th April was 15 months after the launch of Sky TV on the more powerful Astra 1
    satellite and so it was to be an uphill battle to attract customers. Also only a few thousand
    receivers had been manufactured by April 1990 and supply problems continued throughout 1990.
    In October 1990 two of the main BSB shareholders approached Sky about a merger as they were
    loosing several millions of pounds a week. On the 2nd November 1990 BSB merged with Sky TV.

    BSB offered 5 quality channels as part of it's package -
    They were:- Galaxy - The Entertainment Channel, The Sports Channel, Now - The Channel for Living,
    The Movie Channel and The Power Station.
    Here are some promotional items from the launch of BSB,

    Shown above (left) is a BSB badge, a BSB box of matches and 3 BSB channel badges (showing channel logos)
    in unopened poly bags. The channel badges are (from left to right) "Now", "Galaxy" and "The Movie Channel".
    See below all five channel logos in a promotional advert from one of the programme guides including
    details of what the five channels were showing.

    Also above are two BSB "TV Month" programme guide magazines. The one the left is the April 1990
    edition and on the right the May 1990 edition. The April edition is important as it hit the
    streets in March 1990, a couple of weeks before the April launch. The May edition is even
    more important as it hit the streets in April 1990 for the launch of BSB. Indeed you can
    see this is the actual launch issue.
    Below is a promotional BSB sweat shirt. The squarial was used as a selling point as the
    rival programme provider, "Sky", used oval satellite dishes.

    The Philips BSB receiver.

    The Ferguson BSB receiver.

    These units are complete with all packaging and manuals. They are in perfect condition.
    Two unopened boxed squarial dishes. Philips and Ferguson.

    Boxed Philips 35cm BSB satellite dish.

    This powerful satellite could be received on a squarial or a 35cm dish. Even today some 20 years later
    a 45cm Sky mini dish on Astra 2 struggles to provide enough signal unless the weather is good.
    I can remember, at the time, testing a 35cm dish through double glazed glass and it still worked perfectly.
    MAC and D 2 MAC was a late analogue television system of potentially better picture quality than standard
    PAL analogue. In those days there were 4 television standards, PAL for Europe, NTSC for the States,
    SECAM for France and the new higher quality MAC system. D2 MAC was used by some television providers
    and a D2MAC decoder could be added to a standard receiver either via a scart lead or it could be embedded
    BSB was a satellite television broadcast company, like Sky today, that used a satellite to broadcast 5 channels
    in the high quality MAC system. In addition to the quality, the satellite was higher power and small dishes
    could be used. Many of these "dishes" were of the flat Squarial type and some were small 35cm dishes.
    The system was popular due to the very small dish sizes required (even by today’s standards).
    BSB were in direct competition to Sky Television, who, at the time, were transmitting from the Astra 1
    satellite at 19E. At the time I remember going to what was then called "The Cable and Satellite" show
    at Olympia in London. I think it was 1989. That was the first time I ever saw the famous
    "Chaparral Monterey" receiver. Anyway, Sky had a big exhibition stand and so did BSB.
    (Remember BSB was offering 5 channels.) At the entrance to the Sky stand, on the floor, was a walkway
    outlined with tape and written on the floor in the middle of the walkway were the words,
    "WALK THIS WAY FOR 8 CHANNELS". Clearly a direct boast that Sky had more channels that their rival BSB!
    As detailed above BSB got into difficulties and Sky took them over in 1990. As far as Sky was concerned,
    the MAC system was discontinued and the satellite moved to a different position. It was then used by
    the Scandinavian broadcasters who continued to transmitted in the MAC system.
    The BSB name lived on to an extent as Sky TV changed their name to B Sky B.

    The 1st Sky TV receivers.

    The 1st ever dedicated Sky System.

    1989. The Amstrad Fidelity SRX200 receiver
    and Videocrypt decoder.

    Sky Television had been available in the clear for some time using free to air receivers but
    in 1989 the Amstrad Fidelity SRX200 satellite system was introduced.
    Several features made this an industry first.
    It was supplied specifically for the analogue Sky channels that were, at that time, being transmitted
    from Astra at 19E. It was a 16 channel receiver that had 16 preset channels tuned to the Sky frequencies
    on 19E. This made it unsuitable for other satellites or packages as the tuner was not infinitely variable.
    It could not be altered for other frequencies on different satellites.
    The dish was designed for reception of Sky TV from the UK.
    The price was low and affordable - for the first time most people would be able to afford satellite TV.

    When Sky scrambed some of it's channels, a Videocrypt decoder was needed for the subscription card. This unit
    was connected to the receiver by a lead. It acted as a decoding device like a modern digital cam.
    You can see above a Videocrypt decoder complete with box, packaging and manual. Alba also produced a
    16 channel receiver very similar to the Amstrad unit and a boxed sample is also in the collection.
    The blue cap voltage switching single band LNB is shown further down this page. Since it used 13/18 volts
    to switch from vertical polarity to horizontal polarity (not using a polariser) only one cable was needed
    between the LNB and receiver making it easier to install.

    What Satellite Magazine May 1989

    The 1st ever integrated decoder
    Sky System.

    1990. The Amstrad Fidelity SRX400 receiver.

    This is a complete kit. Original box - all serial numbers match. All accessories and manuals.
    This was the first ever Sky receiver that had an embedded decoder to take a Sky card.
    The embedded decoder was a Videocrypt decoder and the Sky card was inserted into the card reader.
    The Amstrad 400 was a dedicated 48 channel receiver for Sky programs and free programs when
    they were originally transmitted on Astra 1 at 19E in analogue.

    Analogue & digital viewing cards.

    Four early Sky TV analogue viewing cards. Left to right, 07, 09, 10, and 11. If anyone
    has an earlier Sky card than an 07, we would be interested in a donation.

    On the left above, two analogue "Adult Channel" cards. The one on the left is the earliest.
    On the right above, two D2MAC analogue cards. The one on the left is for a movie channel "Filmnet"
    and on the right, the adult channel "Rendez Vous".

    Above, two analogue D2MAC cards. The left hand card is for TV 1000 and on the right NRK

    This digital card is for the Dutch Multichoice package and is in the IRDETO system.

    The History of Blind Search Satellite Receivers.

    The Coship CDVB3188C

    The first real blind search receiver.

    This receiver was sold by our company during 2004. In 2006 Blind search is the norm but
    in 2004 it some receivers had limited blind search capability. That is to say they were finding
    a number of channels without the frequency data being in their data base, however, the
    search was not at all thorough and most new channels and feeds were missed.
    The Coship was the first receiver to offer a thorough blind search capability.
    It only had 1500 memory locations and so it had to be used as a tool. Blind search
    one satellite, transfer the new channels to a standard receiver manually, factory
    reset the Coship, then move on the the next satellite. Modern blind search receivers
    Like the Manhattan Plaza range have 8000 channel memory locations.

    Notes on Blind Search receivers.

    The first ever blind search receiver was the RSD 300 except the manufacturers did not
    really know what blind searching was, enthusiasts basically discovered the hidden
    qualities of the chip set and clever scanning software. Shown below is the RSD ODM 302CI. The
    300 was free to air and the 302CI was the same as the 300 appart from the addition of CI slots.

    The RSD ODM 302CI

    The ODM 300 board, converted into a free to air version, was fitted into the SCT Monterey
    but the Monterey version had some irritating software problems.
    The 300 was then licensed to "Newwave" and became the NW9000 but again the software
    was modified and the general opinion was that the original 300 was the best.
    The receivers channel search mode found channels that were not in it's own internal
    software database. It had both auto FEC and auto symbol rate. However, the channel
    search mode was not as thorough as the advanced search in a modern blind search
    receiver. Not sure of the exact date of the 300 but could have been about 2000.
    The Coship CDVB3188C was one of the first real blind search receivers on the market
    and very good at that time. The Technomate and Manhattan Plaza range of receivers
    are the best blind search of all receivers on the market in 2006. Fortec receivers
    made early headway as good blind search receivers (going back 6 to 9 months) but
    now are mostly coming to an end and have been overtaken by Manhattan and Technomate.
    Support from both Manhattan and Technomate is excellent. The manufactuers listen to
    feedback and make improvements.
    Only Manhattan in the 500 and 550 offer thorough blind search and 36 volt
    positioning for motorised systems using heavier duty motors and/or larger dishes.
    Only Manhattan offer thorough blind search with PVR options, the 250, 350 and 550.
    So the 550 has thorough blind search, 36V positioning and Diseqc and PVR
    options - and multistandard - and multivoltage. We currently rate the 550 PVR as
    the best - flagship receiver - in the world.!

    The Manhattan Plaza ST 550.

    The first ever 36 volt motorised digital
    (PVR) receiver with blind search.

    The Manhattan 550 was introduced at the beginning of 2005. It had a built in 36V positioner.
    The early software did have blind search but it was not very thorough. By mid 2005 a large leap
    forward was made with the 70 software. This software contained what many in the industry agreed
    to be the most thorough blind search available. More improvements followed. The 550 was available
    from some dealers with a 120 Gb AV hard drive. In mid 2005 our parent company introduced the
    160Gb AV drive version of the 550. In May 2006 a new AV (audio video) 200gb hard drive was
    fitted into the 550 by our parent company providing about 100 hours of recording capability.
    In April 2005 the Manhattan 550 received the "What Satellite" magazine's
    "Best Premium Satellite Receiver" award. In Feb. 2006 it was retested with the latest software and
    received "What Satellite" magazines "Gold Award - 90%" with comments "Blind search faster and
    smarter than ever" In late 2006 the 550 hardware is being developed further and an improved heavy
    duty, larger current, positioner power supply will be fitted to drive larger motorised dishes.

    The Echostar DVR-7000.

    The first ever 36 volt motorised digital PVR receiver.
    (Hard drive built in.)

    Two CI slots, embedded via access, 5000 channels, SVHS and Dolby Digital. 36 volt 5 amp
    positioner and 40Gb hard drive. Diseqc switching but not compatible with Diseqc motors.
    Introduced by Echostar in Dec. 2002 this unit was based on an Echostar 3600 but with a
    40 Gb hard drive built in. It was probably the best receiver Echostar ever made but it
    was discontinued from the market far too early. The software could have been developed
    further. It was introduced with the 100 software and this was upgraded once to the
    200 software but no further. Larger hard drives could have been fitted.
    The main problem with this receiver was the high price (about £600) and this
    resulted in low volume sales. It was prematurely discontinued in January 2003
    after only 13 months. There is one in the museum. Fully boxed and perfect.

    NEC LNB.

    Early 1980s block type LNB.

    This LNB has a C120 flange for fitting on a feedhorn.
    Notice that polarity had to be changed manually by actually rotating the LNB through
    90 degrees using the knob on the back of it.
    This item has been in my possession since the early 1990s. It was given to me by a supplier
    when he found out I was a collector of "old stuff". It is difficult to date this item.
    Very early 1980s is as close as I can estimate.

    Blue Cap and 23mm LNB.

    Late 1980s to mid 1990s voltage switching LNBs.

    The Blue Cap LNB on the left was the standard voltage switching LNB fitted to 60cm dishes
    set to receive Sky analogue when Sky was on Astra 1 at 19 degrees east. The first Amstrad
    dishes were packaged with this LNB. (See the Amstrad 1989 review below with Blue Cap LNB
    fitted to the white offset dish.) At first dishes were white but a little later, most
    60cm dishes were the black mesh type. The Sky systems had Videocrypt decoders.
    The LNB had a local oscillator frequency of 10,000MHz and was a single band LNB.
    Once voltage switching LNBs had been introduced, this was the most common LNB
    of that type used in the early days of Sky TV on Astra 1.
    The 23mm neck LNB was less common and fitted a particular make of offset dish that
    used a 23mm LNB clamp rather than the more common 40mm clamp. Again this was
    a voltage switching single band LNB.

    The History of LNBs (Low Noise Blocks).

    The pictures below show LNBs and polarisers that are in the museum.

    To understand how LNBs evolved from the 1980s onwards we need to first look at how an LNB works and,
    in particular, the frequency bands it deals with. The common band used for satellite TV is the KU band.
    The modern universal LNB scans this band and can receive and process signals from 10700 up to 12750 GHz.
    In simple terms, the LNB collects the electromagnetic radiation and down converts it from GHz to MHz
    frequencies. It also amplifies the signal (like an aerial mast-head amplifier) and tries very hard not
    to introduce “noise”. (In Hi Fi terms noise sounds like a background hiss in the speaker but in satellite
    TV it affects the LNB’s capability to capture a “clean” picture.) Too much noise reduces the all important
    “signal too noise ratio”: that is the difference between clean signal and noise. The signal to noise ratio
    must be as large as possible. An LNB with a “high gain” is able to “drive” the signal down longer cables.
    The satellite dish parabolic reflector collects the Electromagnetic radiation and reflects it into the
    feedhorn (flared end and cap) of the LNB. It is then sensed (induced) and converted to electricity in a
    small sensor at the end of the LNB. At these high MHz frequencies the signal is still a combination of
    radiation and electricity and so the coaxial cable is a combination of electrical conductor and wave guide
    (which is why high quality LNB cable should be used).

    The radiation entering the feedhorn needs to be polarised in the vertical or horizontal plane. That is so
    that more channels can be carried on a satellite since two transponders can have the same frequency but
    opposite polarities. One can be vertical and the other horizontal. By having a 90 degree difference in the
    polarity between two signals of identical frequencies; the two signals do not then interfere with each other.
    Also note that a digital transponder can carry a number of channels (all of the same polarity).

    In those early days, in the 1980s, “block-type” single band LNBs were used. These could only receive and
    process frequencies from 10.900 to 11.700 GHz. The polarity was controlled by a polariser. This was an
    extra device between a separate feedhorn (the horn collects the reflected radiation) and the LNB.
    Two types of polariser we used: mechanical and magnetic. The mechanical polariser had the highest
    performance as it had zero insertion loss but since is was a piece of wire that turned vertically and
    horizontally by a small motor, it could seize up in the winter. The magnetic polariser polarised the
    signal vertically and horizontally using a magnetic field in a solid state semi-conducting material.

    Above left - Magnetic polariser and 1.1dB single band LNB. Right - close-up of label.

    These polarisers could become “noisy” after a couple of years. Modern LNBs simply have two conducting
    sensors set at 90 degrees to each other each detected by the receiver switching from 13 to 18 volts.
    This voltage (and current) also provides power to the LNB. In early receivers, polarity was changed by
    the mechanical polariser’s motor-driven, 3-wire driving circuits or the magnetic polariser’s 2-wire
    driving circuits from the receiver.

    Above left - Chaparral mechanical polariser fitted to a gold feedhorn and a single band block type LNB
    and below this combination, an "IRTE BU" magnetic polariser.
    Above right - Type "A" Swedish Microwave (non-enhanced) X line block type triple band LNB and a
    modern Astrotel quad band block type LNB.

    Following the single band LNB were two LNBs, fed from a single feedhorn that split into a Y-shaped
    device called an “OMT”. One LNB covered the FSS band (10.900 - 11.700 GHz) and the second LNB either
    the DBS band (11.700 – 12.500 GHz) or the Telecom band (12.500 – 12.750 GHz). Clearly, all of these sub
    bands are within the main KU band. The output from the two LNBs ran down two cables into two inputs of
    the receiver and were switched accordingly by the receiver. In the early 1990s, the block-type dual band
    LNB was introduced. This was actually two LNBs in the one LNB package and the receiver accessed each ½ of
    the LNB by using 13 to 18 volts from the receiver
    (these days voltage switching is used to switch polarity not bands).
    These LNBs were short lived and soon the block type triple band LNB was introduced
    (remember all block-type LNBs use a mechanical or magnetic polariser system) and this covered the KU band
    from 10.900 – 12750. The last block-type LNB to be introduced was the quad band LNB: again, two LNBs in
    the one LNB package, one coving the bands from 10.700 to 11.700 and the other from 11.700 to 12.750 GHz.
    Polarity was switched by a polariser and the band by 13/18 volts.

    Above - modern universal LNBs, 40mm and c120 flange types.

    Finally, in the mid to late 1990s the universal (also quad band) LNB was introduced. This also covered the
    KU band from 10.700 to 12.750 but this time the bands (the two LNBs in the one package) were switched with
    a 22Khz tone and the polarity was switched by 13 to 18 volts: 13V accessing the vertical conducting sensor
    and 18V accessing the horizontal conducting sensor (the two sensors being positioned at 90 degrees to each other).

    In our museum, our earliest LNB is an NEC unit where polarity was changed by physically rotating the LNB by
    hand, using the knob on the end of it!

    Update Feb 2011 - email received -
    "I happened to notice your pictures of some NEC LNB’s which your text suggests are manually rotated to receive
    either polarities. A long time ago I ran a system with 1 1.8m dish and these LNB’s. In my configuration – there
    were two LNB’s, you can see from the fittings that the microwave path can run straight through one and
    then into a second one. The two LNB’s were mounted 90 degrees out of phase and the two outputs were then
    combined in a very large box which was strapped to the side of the dish mount – a single LNB cable
    then ran back to the receiver."

    This was a fairly common method of dealing with two polarities from a satellite. The two LNBs, each at
    90 degrees to each other, one collecting vertical polarisation and the other horizontal polarisation
    were bolted to a Y shaped OMD wave guide. This unit was bolted to the feedhorn and collected the
    microwaves from the dish and fed them to both LNBs. The coaxial outputs of the two LNBs connected
    to two cables, the other end being connected to the receiver and the receiver switched to each LNB
    for each polarity. Chaparral used there own version of "OMD" type waveguide - see Chaparral dish kit.
    where the "OMD was not Y shaped but did the same job.

    The cable and Satellite Show 1986.

    1986 show guide brochure.

    1986 was really in the very early days of satellite TV. The annual show in the UK was called The Cable and
    Satellite show. Many exhibiters from that time have long since disappeared.

    See What Satellite magazines from the late 1980s on the
    old satellite publications page.

    Also go to and then search for 'Satellite TV Reception.
    On the menu that comes up scroll down until you find a 10 minute item -
    'Satellite TV Reception Enthusiast' Steven J Birkill. This goes from the ATS-6
    through OTS to about mid 80s when he left BBC Transmitters for Bob Cooper's
    satellite setup in Oklahoma. This all fell apart a couple of years later and
    Steve returned to the UK, It is rumored that he was involved with designing
    the Amstrad front end of their first satellite receiver range

    A TV-DXers Handbook by
    Roger Bunney. 1986.

    This book comprehensively covers all aspects of the analogue tv systems at the time and includes two
    chapters on satellite tv. Footprint maps are included and they show three satellites that include UK
    coverage on the 11GHz band in 1986. These satellite transmitted from 13E, 7E and 27.5W.

    "Satellite Television" by Peter Pearson.

    We are very grateful to Peter for providing a signed copy of this historic publication.
    First published in 1987 it explains the basics of satellite TV to a public who, at the time
    only knew about the 4 channels available from an aerial. Very few people in the UK in 1987 had
    either satellite TV or cable. Indeed the satellites were low power requiring a fairly large dish
    and whilst the channel choice was wide compared to terrestrial TV, it was very limited
    compared to the digital choice today. A small extract from the book is shown on the right
    and the main satellites available at the time are detailed. Clearly 13E was just as
    important in 1987 just as it is today. Peter also contributed some old satellite receivers
    to the museum including the Triax 2000S shown higher up this page.

    An advert for 90cm prime focus
    dishes from 1989.

    Source :

  4. The Following 7 Users Say Thank You to Admin For This Useful Post:

    andymal (11-01-2012), georgesfind (11-06-2013), nickman9271 (12-01-2012), sotirisvvv (01-03-2012), telisgr (12-01-2012), teodim1 (11-12-2012)

  5. #3
    Administrator nickman9271's Avatar
    Join Date
    Apr 2011
    Thanked 385 Times in 149 Posts

    Re: Απο

    εξαιρετικο θεμα , νομιζω οτι πρεπει να γινει sticky χωρις δευτερη σκεψη .

  6. The Following 4 Users Say Thank You to nickman9271 For This Useful Post:

    Admin (14-03-2013), georgesfind (11-06-2013), sotirisvvv (01-03-2012)

  7. #4

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    sata.jpg.................................................. ..................

  8. The Following 2 Users Say Thank You to kreta111 For This Useful Post:

    Admin (14-03-2013), georgesfind (11-06-2013)

  9. #5
    Moderator georgesfind's Avatar
    Join Date
    Mar 2013
    Thanked 1,816 Times in 672 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    PACE VC 100 | Video Crypt Decoder
    mit 21-PIN - A/V - SCART Buchse
    Video Crypt Decoder, Anschluß erfolgt über einen AV/SCART Stecker auf der Geräterückseite. De-Emphasis ein- oder ausschalten.
    Maße: H 680 mm x T 215 mm x B 360 mm. Sie erhalten das Modell RBAAJHK0042/419, Einsatz bei 220-240V, 50Hz, max, 22W. Das Gerät ist in U.K. gefertigt.


  10. The Following 2 Users Say Thank You to georgesfind For This Useful Post:

    Admin (14-03-2013), alejandros1967 (14-03-2013)

  11. #6
    Moderator georgesfind's Avatar
    Join Date
    Mar 2013
    Thanked 1,816 Times in 672 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    Philips CTU 900 D2-MAC Eurocrypt Decoder

    2 Kartenslots für Smart Cards und die Bedientasten hinter einer Klappe auf der Frontseite. Auf der Rückseite befinden sich 2 Euro-AV-Buchsen (Scart) für VCR und TV, ein Cinch Audio-Ausgang, 2 koaxiale Antennen Ein- und Ausgangsbuchsen mit 10dB Dämpfungsschalter sowie eine Anschlussbuchse für die Systemfernbedienung von Videorecordern der Firma Philips.


  12. The Following 4 Users Say Thank You to georgesfind For This Useful Post:

    Admin (14-03-2013), alejandros1967 (14-03-2013), Andreas (14-03-2013)

  13. #7
    Moderator georgesfind's Avatar
    Join Date
    Mar 2013
    Thanked 1,816 Times in 672 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    Aπο τα πρωτα τευχη το tv sat...

    TV SAT.jpeg

  14. The Following 5 Users Say Thank You to georgesfind For This Useful Post:

    Admin (14-03-2013), alejandros1967 (14-03-2013), Andreas (14-03-2013), telisgr (14-03-2013)

  15. #8
    Moderator georgesfind's Avatar
    Join Date
    Mar 2013
    Thanked 1,816 Times in 672 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    O Πρώτος ψηφιακός μου δέκτης.....


    Νokia 9800s mediamaster....
    310.000 χιλιάρικα τοτε η τιμή του...

  16. The Following 3 Users Say Thank You to georgesfind For This Useful Post:

    Admin (29-03-2013), alejandros1967 (29-03-2013)

  17. #9
    Moderator georgesfind's Avatar
    Join Date
    Mar 2013
    Thanked 1,816 Times in 672 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

  18. The Following User Says Thank You to georgesfind For This Useful Post:

    Admin (27-04-2013)

  19. #10
    Super Moderator
    Join Date
    Apr 2011
    Thanked 2,487 Times in 1,229 Posts

    Re: Oλα τα δορυφορικά αρχαία όπως και νέα....

    DSC00066.JPG LNB Το εχω στην αποθηκη αρκετα χρονια .Το εχει δοκημασει καποιος; αξιζει το κοπο να το επησκευασω και να το εφαρμοσω; Να το αφησω για το μουσειο;

  20. The Following User Says Thank You to Andreas For This Useful Post:

    georgesfind (02-02-2014)

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts